FrankenZteins back!

thanks im glad you guys like it especially you Brendan great deal of worries off my chest haha

just wanna thank Brendan for the opportunity to work on his can and the trust he giving me to show off the potential i have for modding hahah well i hope you the best and a bet you edging to drive this beauty again

so all that left on the job card is weld and paint roll cage brendan so you want it the purple as well of just the black also im going to look for the power steering leak if have spare time

ok so what else was ther

c pillar brace 30mm alu round bar
water meth tank stainless round or square
do you want me to fix the banjo bolt on the turbo

anything i missed just let me know

Just a stupid question,

What Hubs/Disks/Calipers are on the front there ?

Hey Mical, great job so far bru really digging it, ...i entered hesketh now as im confident all current mods will be finished in time...
DONT make my cage purple.. i KEEL YOU! 🙂 Black all the way plz.
Yhe the C pillar brace in alli ( if you have time / no stress if you dont i can bring it back again before hesketh)
Dont worry about the banjo bolt, i think it was just doing a little oil sweat, but i'll keep my eye on it.
I was thinking to rather have the Steering resevior made up rather that the W/M tank for now.. but i'll phone you tomorow and we can talk about it.
Remember when you weld up the holes in the cage to give the strut towers a once over aswell 🙂

...keep it up

@350Z ...
ibisu 5x114.3 Hubs from Jerry @ Import
Calipers i organized with the Help of Gary, they off a R33 ( i think ) and the rears are Z32
All Discs are Beeg 🙂 and again Gary helped me source them, and they are really really sweet. ...Thanks Gary 🙂

cool cool so wait you want a steering resivour tank for now and then a water meth ok cool how much you want to hold in the steering tank the wat yours leaks now ill weld in a 2nd fuel tank hahhaha

and dont worrie ill do it black im not keen on fumigating myself spraying hahah

and you talking about the suspension turrets on the seem cool will do that also the one point by your feet dont worrie bout the wires they will be protected by a sheild

dont worry about painting the cage black .. i'll do it, it'll make me feel special.

that part where the cage is missing the floor at my feet is a problem, not only because of the wiring... also the tar sound proofing tar stuff is still in that area

@ Mical: What material did you use for the fender braces??

26mm shed 40 tube

26mm shed 40 tube

And you dented and flattened it like that... 😮

here we go yes gary i did and guess what it does not mess up the strength it had to be done or else the fender would not clear and im sure brendan does not want me to start cutting the sx bode to fit them in or by the way if you can make better go right ahead

Now now kidZ.. no fighting on my thread 🙂 I'll see/feel soon enough if it works or not ... and i'll let you you'all know.

ok daddy im sorry please dont spank me again like you always spanking mommy

I think he's just amazed that you managed to dent and flatten the tubing like that, thats about a 3mm wall thickness. Bloody heavy and difficult tubing to flatten like you did.

oh hehehe well i have a 80 ton press at my shop works wonders

Hey Brendan, tell us all the story about the day you tried to impress the chick watching you in your work parking lot and ended up unconcious.
🙂

Guy wrote:

Hey Brendan, tell us all the story about the day you tried to impress the chick watching you in your work parking lot and ended up unconcious.
🙂

yes this sounds like a good story

ha, who you been talking to bru!?? 😈 it is a funny story though 🙂

Do tell....we need al laugh 😀

DriftZ wrote:

ha, who you been talking to bru!?? 😈 it is a funny story though 🙂

then tell us promise i wont tell alex

oh by the way i washed your car

here we go yes gary i did and guess what it does not mess up the strength

I didnt say a word about that, why you so touchy about your work... 😕

I think he's just amazed that you managed to dent and flatten the tubing like that, thats about a 3mm wall thickness. Bloody heavy and difficult tubing to flatten like you did.

This is what I meant...

oh hehehe well i have a 80 ton press at my shop works wonders

Looks like it was done with a hammer but I wont say anything else.

poizen wrote:

DriftZ wrote:

ha, who you been talking to bru!?? 😈 it is a funny story though 🙂

then tell us promise i wont tell alex

oh by the way i washed your car

Alex knows the story anyway.. im just lucky she’s a qualified nurse with the amount of bad luck I have, burnt hand was a goodie 😀

You washed my car??? That’s brave, you must have had to use a 80grit sandpaper to get some of that dirt off. ha

.. Draco... I wasn’t trying to impress the chick & it wasnt hysterical just a bit embarrassing 🙂 , but well basically I was having a bad day to begin with, then I was running late for work after missioning around with a flat runflat tyre and oil smoke coming from my leaking turbo elbow ( this is months ago BTW ).. anyway I arrive back to work where our new parking is a shambles coz they constructing another huge building at our work so the parking arrangement is something like you’d find at some mad hippy festival. So I spot a gap and make my way to it, but I need to fiddle my angle a bit to get into it. while fiddling and just too irritated to even really turn my head and see the soft little yaris that had parked its bum out too far.. no bang just a little soft "howzit", shit so now I know I’ve touched the yaris .. so I proceed to park and go to the back to see if I have damage. Nothing at all, cool, so I walk over to the Yaris.. (now my SX's bumpers have been emptied, I’ve take the heavy supports and everything out ..so they actually just for show, I can bend it in with my pinky ).. the yaris, has a horrible HUGE dent in the rear bumper. I look around and because I was late no-one seems to be in the parking area, so I get on my back and proceed to attempt to push out the dent on the Yaris... almost successful until I cut my hand on some mysterious sharp object under there. So its looking better now.. only a small dent, but its got a scratch, now I’m polishing & flooking. Angry coz I know I’m in for some not so sweet spending. so i give up the panel beating and start missioning back up to work very late now. But I’m walking angry, head down, swearing and walking fast. Next thing it felt like Mike tyson just landed a killer swing out of no-where on my forehead, I cant remember but I think I may have landed on my arse, but got up straight away and discovered some okes Flippin Kayak was so long it was overhanging by 1.5 behind his car, a flippin Hard kayak too. but at the same time i saw someone up on the balcony at work having a smoke and as my eyes sharpened I realized it was the hot new blonde number at work that all the okes were going gaga over, so I act like nothing had happened and carry on walking, swaying a little... too cool, only to realize she'd just watch my entire car park ballet'. and then I split my big toe right open on the way up the stairs like 10ft away from my desk, thick juicy dark blood oozed out of it... and then followed by a week of other misfortunes.. goodtimes ( they come and go ) .. oh and R6700 damage to the yaris.. but I spoke to the panel beater directly and got it down to – cash - R3800 ..Still wasn’t cool