My 200sx and the issues (Pics ADSL)

I have a engin you can buy 082 3360941

Also have a semi complete CA with pistons rods ect. For R3k.

Sent from my GT-I9100 using Tapatalk

Thanks guys, i will give you a call but i am only looking for a complete block.

update time!!?

Haha, hey bud. I have pulled the motor. Now im just waiting for all the new goodness from the Americas and then i will post the update 🙂

Atleast im seeing some progress with your cab there. Keep it up!

Hey guys, so here is my update with new parts.

I fitted the clear lights all round and everything is looking good. Will post pictures later

Got the new engine internals and have dropped the block off at the engineers for boring.

Also picked up an mistake we did with the build. We removed the pipes from the tapped covers and only fitted filters, i believe this creates a problem with the pressure in the crank case not being able to vent properly and thus causing excessive crank pressure and would lead to oil being pushed out on the exh side tapped cover. So i will reconnect the pipes and also fit a breather pipe in front of the turbo to see of it would remedy my issue.

Another issue i have to sort out is that my fuel pressure does not raise 1:1...hmm i think i must remove the reservoir tank i fitted and run straight pipes from the 2 internal tank pumps to the 2 Bosch 044's and then run a thick pipe to the fuel rail. That should simplify everything.

Hopefully we will break the 400whp mark at 1.2 bar this time round and press on for the 1.6 bar mark and within the 500whp region...

nice dude glad to this this project moving forward

Pics of the lights fitted

SonOfAnarchy ZA wrote:

nice dude glad to this this project moving forward

Thanks Bud, i followed yours as well. See you have been busy lately. 😀

ja nearly on the home stretch cant wait!!

Wie se geld het jy gesteel??? Lyk goed man, lekker bou!!!

Hahaha, as ek jou se sal jy weet waar het ek die Kruger punte opgegrawe.

https://www.youtube.com/watch?v=Nl_vM8mN7xk

Just a quick video of the car running and fooling around, was just fooling around. Car limits at just over 6000rpm with 0.5 bar boost...

Hi Guys, so its been a long time since i posted. In the mean time i have rebuild the motor with CP pistons....So here is to the next stage of development

First item is the ID 1000 injectors, i believe they would be super. Will let you guys know how they perform.

New poly bushes

CA18det solid lifter set 🙂

Tomei solid lifter cams....270 deg 10.25

Will post a video showing before and after. Maybe get some Idle characteristics in there as well

:-_)

EGT

Greddy electronic boost controller