WANTED: S13 Rear speakers

Hi guys want some S13 Rear speakers, mine is shot, blew them this week with the Car PC 😕

Any 2x4" speakers will fit perfectly. Good time to upgrade.

Any 2x4" speakers will fit perfectly.

Me also has done something similar. 8)

ChemCool wrote:

Any 2x4" speakers will fit perfectly.

Me also has done something similar. 8)

2x4 speakers :?: Any body know where to get them?(new) my front speakers are making a noise if I play too loud, would like to get replacements, perhaps for the rear too, don't know If my rears are still working they not connected. I'm not really to keen on making something work just a relative simple swap.

hehe sorry for jumping into the same boat as you, Vlade

Upgrade... maybe later got other things thats more important at this stage... My Polo's clutch fucked out and S13 is in needs of new brake pads

Any shitty radio shop will have 2 x 4 inches. I upgraded my front to 5 1/4 inch and that was so simple. I have 6 x 9 in the back parcel tray, you can buy my whole tray if you want, I have a new one with no holes and will be fitting some speakers back in their original spot.

Thinking about this...

Since a whole lot of members on the forum owe me money 😀

Thought about it, thanks but no thanks.

Think I'll build some sidewalls in the boot, with some plywood this weekend and fit some 6x9 in there... I got a set of 400W Kenwoods lying around.

But I would have liked a set of 4x2 for free 8)

Gary57 wrote:

Any shitty radio shop will have 2 x 4 inches. I upgraded my front to 5 1/4 inch and that was so simple. I have 6 x 9 in the back parcel tray, you can buy my whole tray if you want, I have a new one with no holes and will be fitting some speakers back in their original spot.

How simple? cutting? might be able to do this aswell then 😀

Piece of piss. VC has the template; cut it out of hardboard, cut the hole for the speaker, paint it, fit it, dead straight forward.

Gary57 wrote:

Piece of piss. VC has the template; cut it out of hardboard, cut the hole for the speaker, paint it, fit it, dead straight forward.

the template was posted in this section some time ago.

i dont have the actual electronic document of it, it was a link to another site, but its here somewhere!!!

search peeps, search!!!

There is a good how-to article on the nissansilvia.com forum.

Vlade wrote:

But I would have liked a set of 4x2 for free 8)

I actually bought a set of Jensen 4x6 to fit in there (I think they are 4x6 not 4x2). Anyway, fitted them, but since I didn't have an amp to drive them, they sounded kak, so I put the standard ones back on. Only "mod" needed was to cut out the original harness connector (yea, I did some crazy things back then 😂 ). Anyway, I can look for them (think I gave them to a friend who isn't using them), and if I find them, you can have them 🙂

Oh, and I think I'm one of the people that owes you money!

Toby I think you're right. 4x6 is the size, not sure why I thought 4x2.

Anyways, there are some plastic covers that angle the original speakers in a certian way. The 4x6 are direct replacements for these covers. I didn't feel like cutting wood and making new holes etc. Good quality 4x6 will do the job.

Doctor G wrote:

Toby I think you're right. 4x6 is the size, not sure why I thought 4x2.

Anyways, there are some plastic covers that angle the original speakers in a certian way. The 4x6 are direct replacements for these covers. I didn't feel like cutting wood and making new holes etc. Good quality 4x6 will do the job.

I cut the template out from the nissansilvia site to fit my 13cm(i think) sony speakers, turns out the template was downscaled or something, I was gatvol after hard work that accomplished nothing, so I positoned them as well as I could (not the best fit tho) and made new holes, they work and are behind the door panel , so I dont care, besides they sound a hell of a lot better than the old ones which made scratching noises when I turned it up. :200sx_punk:

Phoned my local sound shop... they don't have any stock but can get some next week

otherwize I need to fit some 5 1/4" onces up front, but decent speakers there I'm looking at R450 again

I got 5 1/4" SONY speakers for R215 and they play quite fine.

I treat the standard speakers like surround speakers in a 5.1 speaker set - they should only play mid and high frequency, so I put in filters to take out any frequency below 300Hz from getting to them. The sub handles those. That way, I achieve a pretty balanced sound that is acceptable.

JBL makes nice direct fit one's, 2 way speakers. I removed mine but they are all torn.