Sockted ECU \ Mines ECU chip by Speedlab \ CA18DE cam

Good Morning Guys…

I know there is a good chance of flaming on this sale but here goes I am selling my Mines chip / Socketed ECU and CA18DE cam,

Mines chip…
-----------------------------------

I have been using the mines chip in my car for around 1 ½ years now the timing is aggressive down low but is backed off a little when on boost the fuel maps have been “riched” up quiet a bit and the knock maps have also been given a conservative tune. You are more then welcome to contact the guy from Speedlab (real friend guy) for more information. I will also try supply the stock MEC-0005 ECU chip if I can find it.

http://cgi.ebay.ca/Mines-Nissan-CA18DET-ECU-Chip-Sylvia-180sx-S13-89-94_W0QQitemZ280109325391QQihZ018QQcategoryZ33597QQtcZphotoQQcmdZViewItemQQ_trksidZp1742.m153.l1262

Sockted ECU
----------------------------------
The ECU has been “Socketed” professionally it has an easy release for the Eprom Chip.

CA18DE Cam
----------------------------------

You guys have all the info on this one…

PM me for more info I am looking for R 1400 for everything which is not bad in my eyes.

Sorry Guys I forgot to add the following about the chip.
Its had the boost cut removed, sadly depending on who you ask here it also had the Rev limiter removed the acceleration increase fuel map has also been increase to help with boost transition.

Pm me and I will send you a Pic of the socketed ECU

prices?

Pinkfluffybunnys wrote:

PM me for more info I am looking for R 1400 for everything which is not bad in my eyes.

guys I am Flexible with regards to the Ecu. Just ask if you want to know anything.

But the chip did cost around R 500 just to have shipped here plus the cost of socketing the ECU and the secondhand ECU itself but then again they are both second hand so how does R700 sound for the chip and ECu?

suddenly its a bargain!!!

hmmm - but it wont work for me cos i sold all that CA18 CRAP i used to own!!!

Bump

does it inc std harness ?

does it inc std harness ?

why would you need the STD harness?

If i wanted to take my dicktator out, my harness has been abused.

Pink what ECU are you fitting??

If i wanted to take my dicktator out, my harness has been abused.

Sorry Rat no harness with the sale.
Hmm its strange I really thought I would have had this sold by now. I mean its a way better tuned chip the the stock MEC-005 map

Pink what ECU are you fitting??

😈 Once the wideband and knock filtering arriaves I will give you a full run down of the "ECU" Im planning on using just hope I can get the Knock map tracing working

What Knock setup and wideband are you going to use??

PLX??

Cam Has been Sold...

ECU is still available

will this basically just replace the stock one? and will it run on the stock CA setup?

The History Of the Mines chip was an upgrade on the stock setup.
In japan at the time when you purchased your CA18DET power 200sx you would send the ECU to them and they claimed to squeeze an Extra 10 Kw from it.

My chip is a modified tune off this stock chip the fuel and timing has been modified / smoothed over for the 4 port Ca18det not the jap 8 port with the transition butterfly's in the old map the timing would fall at the transition.

Its also been tuned to add more full in the boost range both for safety and extra boost.

will this basically just replace the stock one? and will it run on the stock CA setup?

Yep and Yep

Dude R700 you say... shit won't have cash until the end of the month!!!

After I looked through my old mails about the chip and the fueling.
I am going to retract my statement about the stock set-up, The Chip has been tuned for a Cone, Exhaust and cooler on the stock set-up I am scared it will over-fuel which is not very good

Pinkfluffybunnys wrote:

After I looked through my old mails about the chip and the fueling.
I am going to retract my statement about the stock set-up, The Chip has been tuned for a Cone, Exhaust and cooler on the stock set-up I am scared it will over-fuel which is not very good

mmm.... :200sx_shit:

Thanks Riekert

what did I say wrong?