powet of an standard S14?

howzit guys! whats the Std KW a S14 pushes out? :?:

160Kw if Im not mistaken

so what kw would you say should i push out if the exhaust changed to 76mm boosting 0.7bar cone filter.. 170kw?

Factory rating is 150kw flywheel
They make between 125kw and 135kw stock on the dyno I use.

so i can get about 137-140kw on the weels?

Didn't brenwin give you the dyno graph?
I think it made 138 kw at 0.8 with the exhaust...

ooo yes he actualy did it did 134kw with the old 57mm exhaust . he fitted a 76mm on 2 weeks before i bought it!

dwayne wrote:

ooo yes he actualy did it did 134kw with the old 57mm exhaust . he fitted a 76mm on 2 weeks before i bought it!

get a chip or something so it can be tjooned.

is this your first turbo car dwayne? any chance of joining us at tarlton thursday night for a few runs?

phinx, start getting out of standby now already for thursday night. i'll meet you at the N14. there were between 5 and 10 cars running last week, so the queue is really short.

i'll post my latest dyno hopefully a bit later. i actually have a few dyno sheets now, first one was just before i took the car to calibrator. it was doing 124kw. The turbo was 140k kms old and it was running very lean..

phinx, start getting out of standby now already for thursday night.

Tarlton is every 2nd Thursday night.

The Calibrator wrote:

phinx, start getting out of standby now already for thursday night.

Tarlton is every 2nd Thursday night.

now thats what i call a spoiler

no not the first one! had a uno turbo audi a3 1.8 t golg 4 gti and now the sx! tarlton is a bit far from home im from the east rand!

It was 128 RWKW before exhaust and is was 134 RWKW after the exhaust

thanks! so how much power can a chip make?

dwayne wrote:

thanks! so how much power can a chip make?

probably in the region of 150rwkw's on your "butt" dyno!!!! 8)

ok and where can i get hold of an chip?

try this:

http://200sx.za.net/phpBB2/search.php

cos i'm sure this has been covered already!

otherwise...

thanks will see what i can find

try www.thecalibrator.co.za

also google "dastek unichip" and "perfect power SMTP"

ok so i was at nitro race way on saturday and the guy with the white S14 with the skyline turbo motor in told me i can go up 2 1bar boost with 95 octane. can some one please advise me coz 1 would love 2 but dont want to hurt the turbo or motor

If you got the stock T25 don't even try it... Unless you like buying turbo's... The poor T25 doesn't like to be mishandled like that, I'd say its safe to boost 0.8 on it.